RedMi Note 6 Pro Test Point | EDL Mode 9008 | ISP EMMC Pinout

Find out the steps to activate EDL mode or get how to test the points of test for the Redmi Note 6 Pro!

In the guide below, you will see an illustration of the ISP Pinout and the Test Point for the Xiaomi Mi Note6 Pro. By using ISP Pinout or Test Point ISP Pinout, or Test Point, you are able to perform tasks like restoring your default ROM and bypassing the FRP lock or resetting the user’s data on your device through the UFi Box. In this tutorial, you will discover how to boot into the 9008 mode of EDL.

What is ISP Pinout?

In-System Programming (ISP) is also known as In-circuit Serial Programming (ICSP). It can be utilized for hardware with pins that are cross-referenced or contacts. Through the process of connecting/shorting the pins, the logic board (motherboard) is powered. This method can be utilized for things like computers, mobiles, or any other electronic devices.

It is possible to find what is the IS Pinout connection on the circuit board that controls your device. To get these pinouts, detaching your device’s back cover is crucial. It is possible to follow the image below to find the pinout pins for this particular phone. Also, you can look at Redmi Note 6 Pro Flash File using MIUI 11.

How to Enter EDL Mode on Xiaomi Redmi Note6 Pro

Follow these steps carefully to boot your smartphone into EDL Mode (Emergency Download Mode)

Also Read: [How to] Boot Into EDL Mode Any Xiaomi Smartphones!

Method 1: Using ADB

  • Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
  • Connect your device to your PC via a working USB cable
  • Open the ABD command and enter the command
    • ADB reboot edl

Method 2: Using Fastboot

  • Download ADB and Fastboot Tool and extract it to your PC (C:/ Drive)
  • Boot the device into the boot loader, and devise by the below instruction
  • Power off your device, press the Volume Down ( – ) Key and Power button simultaneously until the MI logo appears on the screen
  • Connect the smartphone to the PC using a working cable
  • Use ADB or fast boot Tool to give commands, first go to ADB installed folder, press and hold Shift Key + Right Click
  • Select the available option from the menu “Open Command Window from here,” and type the following command; if it is not working, try another command

 

Leave a Reply